Chapter 15 Input/Output instructions
406 Rockwell Automation Publication 2080-RM001D-EN-E - February 2015
RCP error codes
The following table describes RCP error codes.
Error code Error Name
0 RCP_ERR_NONE
1 RCP_ERR_NO_SDCARD
2 RCP_ERR_DATAFILE_FULL
3 RCP_ERR_DATAFILE_ACCESS
SD card may be identified as a) broken; b) full; or c) read
only.
4 RCP_ERR_CFG_ABSENT
5 RCP_ERR_CFG_ID
6 RCP_ERR_RESOURCE_BUSY
7 RCP_ERR_CFG_FORMAT
8 RCP_ERR_RESERVED
Reserved for future possible expansion.
9 RCP_ERR_UNKNOWN
10 RCP_ERR_DATAFILE_NAME
11 RCP_ERR_DATAFOLDER_INVALID
12 RCP_ERR_DATAFILE_ABSENT
13 RCP_ERR_DATAFILE_FORMAT
14 RCP_ERR_DATAFILE_SIZE
Recipe data file size is too big (>4kb).
To Next Page
Loading...
