Ladder Diagram (LD) elements Chapter 3
Rockwell Automation Publication 2080-RM001D-EN-E - February 2015 33
To add a label for a rung
1. Right-click the area to the left of the rung, and select Add Label.
2. Select the Label, and type a description for the rung.
Example: Label
To add an element to an LD program
To add a rung to the LD language editor, do one of the following:
• From the Toolbox, drag the rung element into the language editor, or
• From the Toolbox, double-click the rung element to add it to the language
editor, or
• Right-click and existing rung, select Copy and then paste a copy of the rung
into the language editor.
Tip: A plus sign (+) appears on top of a Toolbox element when you hover over a valid target. Release the
mouse button to add the element.
Tip: You can use keyboard shortcut keys to add elements to your LD program. See LD Keyboard shortcuts on
page 54.
Tip: If your ladder diagram contains more than 355 rungs, use the down triangle rather than the scroll bar to
view additional rungs.
To Next Page
Loading...
