Allen-Bradley Rockwell Automation 1734-AENT User Manual

Publication 1734-UM011D-EN-P - May 2011
116 POINT I/O Module and RSLogix 5000 Software Controller Tag Reference
1734-VHSC24
1 Channel 15…24V DC Very High-speed Counter
1734-VHSC5
1 Channel 5V DC Very High-speed Counter
Input Data Data Type Default Value Valid Data Values
Present Data DINT 0 0…16,777,215
Stored Data DINT 0 -2,147,483,648…2,147,483,64
7
(0…4,294,967,295)
Status
Zero Frequency Detected
Stored Data Count_2
Stored Data Count_3
A Input Status
B Input Status
Z Input Status
Output Status_8 (Output 0)
Output Status_9 (Output 1)
Output Fault_10 (Output 0)
Output Fault_11 (Output 1)
Not Ready
EEPROM Fault
Program Fault
(incomplete / incorrect / conflict)
INT
BIT 1
BIT 2
BIT 3
BIT 4
BIT 5
BIT 6
BIT 8
BIT 9
BIT 10
BIT 11
BIT 13
BIT 14
BIT 15
0
0=No Fault
1=Fault Detected
Cycles through 0, 1, 2, 3, 0,
Increments after update
0=Input A/B/Z is Off
1=Input A/B/Z is On
0=Output is Off
1=Output is On
0=No Fault
1=Open or Over Load
0=Module Ready
1=Module Initializing
0=No Fault
1=EEPROM data bad
0=No Fault
1=Bad Configuration
(Refer to Program Fault on
page 117)

Allen-Bradley Rockwell Automation 1734-AENT Specifications

General

Model	1734-AENT
Category	Network Hardware
Type	EtherNet/IP Adapter
Ethernet Ports	2
IP Addressing	Static or DHCP
Network Address	Configurable via software
Mounting	DIN rail
Number of Ports	2
Port Type	RJ45
Communication Protocol	EtherNet/IP
Manufacturer	Rockwell Automation
Power Supply	24V DC
Enclosure	Open-style