Altec LASSIE2 Plus - Page 112

112
3
Click [OK].
The settings for paper handling after print are applied and saved.
Item Description
Auto Cut
After Every Page
After printing, the paper is fed to the position where autocut-
ting is possible and is automatically cut on a page-by-page
basis. When resuming printing, the paper is fed in the reverse
direction to the printing position and then printing resumes.
Only After Last
Page
After printing, the paper is fed to the position where autocut-
ting is possible and only the last page is automatically cut.
When resuming printing, the paper is fed in the reverse direc-
tion to the printing position and then printing resumes.
After Specified
Number Of Page
Specify the cut interval.
After printing, the paper is fed to the position where autocut-
ting is possible and is automatically cut at specified intervals.
When resuming printing, the paper is fed in the reverse direc-
tion to the printing position and then printing resumes.
No Auto Cut
Feed To Peel Off
Position
After printing, the paper is fed to the position where autocut-
ting is possible, and stops without performing autocutting.
Paper cutting is possible with the CUT button. When resuming
printing, the paper is fed in the reverse direction to the printing
position and then printing resumes.
Feed To Cut
Position
After printing, the paper is fed to the position where peeling is
possible, and stops. Paper cutting is possible with the CUT but-
ton. When resuming printing, the paper is fed in the reverse
direction to the printing position and then printing resumes.