Altec LASSIE2 Plus - Maintenance; Changing the Printer Settings

187
Chapter 5 Maintenance
5
Maintenance
Changing the Printer Settings
Follow the steps below to change the printer settings, for example, to change the media type:
Network Printer
To change the settings for network printers, use EPSON Monitoring Tool provided for
administration.
To change the settings for multiple printers at a time, create a backup file in advance and change the
settings using EPSON Monitoring Tool. For details on how to create a backup file, see "Creating a
Printer Backup File" on page 189.
Before using EPSON Monitoring Tool, register the network printers.
Printers on the same network are automatically registered. For a network printer on an external
network, register the IP address of the printer to EPSON Monitoring Tool before using it.
 Install the following items to the administrator's computer in advance:
 TM-C3500 Printer Driver
 EPSON Monitoring Tool
 For details on how to change the settings for network printers, see EPSON Monitoring Tool
User's Manual.
 When the media settings are changed, the printer driver settings must also be changed.
For details, see
"Changing the Printer Driver Settings" on page 192.