Altec LASSIE2 Plus - Nozzle Check Mode Settings

117
Chapter 3 Handling
3
Nozzle Check Mode Settings
The following modes are available for the printing operation mode setting. (The mode is set to [Anti-
missing read mode] by default. If you use the default setting, there is no need to change the settings.)
•Anti-missing Dot Mode
•Anti-missing Read Mode
•Anti-missing Color Mode
•No Missing Dot Detection Mode
(For details on each mode, see "Auto nozzle check system" on page 24.)
How to Set the Mode
1
Turn the printer on.
2
Display the printer driver window.
(See "How to Display the Printer Driver" on page 43.)
3
Select [Printer Utilities] tab and click [Printer Setting Utility] under [Printer Pref-
erences].
4
TM-C3500 PrinterSetting window appears. Select [General]-[Printer Opera-
tion Settings].