Altec LASSIE2 Plus - Hardware Requirements

198
Hardware Requirements
Temperatures/
humidity
(See
"Environmental
Conditions" on
page 232 for
details.)
Printing 10 to 35C {50 to 95F}, 20 to 80%RH (no condensation)
Storage When packed (ink not loaded): -20 to 60C {-4 to 140F}, 5 to
85%RH (no condensation)
-20C or 60C {-4 to 140F}: up to 120 hours
Ink loaded: -20 to 40C {-4 to 104F}
-20C {-4F}: up to 120 hours
0 to 30C {32 to 86F}: up to 6 months
40C {104F}: up to a month
Overall dimensions (W × D × H) 310 × 283 × 261 mm (excluding protrusions) 
{12.20 (W) × 11.14 (D) × 10.28" (H)}
Weight (mass) Approximately 12 kg {26.45 lb} 
(Not including the ink cartridge, maintenance box, AC adapter,
and roll paper).
OS Microsoft Windows 10 (32 bit/ 64 bit)
Microsoft Windows 8.1 (32 bit/ 64 bit)
Microsoft Windows 8 (32 bit/ 64 bit)
Microsoft Windows 7 SP1 (32 bit/ 64 bit)
Microsoft Windows Vista SP2 (32 bit/ 64 bit)
Microsoft Windows XP SP3 (32 bit)
Microsoft Windows XP SP2 (64 bit)
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2012
Microsoft Windows Server 2008 R2 SP1
Microsoft Windows Server 2008 SP2 (32 bit/ 64 bit)
Microsoft Windows Server 2003 R2 SP2 (32 bit/ 64 bit)
Computer Must support the following computers that run the above operating
systems.
 PC/AT compatible
CPU
Conforms to the operating environment of the OSRAM
HDD
The printers on the network is supported up to 64 printers. In that case, if the minimum
requirements above are not met, the printer may not be able to come up to its standard.