Altec LASSIE2 Plus - Environmental Conditions

232
Environmental Conditions
Item Specification
Temperatures/
humidity
Printing 10 to 35C, 20 to 80%RH (no condensation)
Barcode
printing
15 to 35C, 20 to 80%RH (no condensation)
Storage When packed (ink not loaded): -20 to 60C, 5 to 85%RH
(no condensation)
-20C or 60C: up to 120 hours
Ink loaded: -20 to 40C
-20C: up to 120 hours
0 to 30C: up to 6 months
40C: up to a month
Pressure
(elevation)
Operating 850 to 1060 hPa (approximately 0 to 1500 m above sea level)
Not operating
(including in
transportation)
850 to 1060 hPa (approximately 0 to 1500 m above sea level)
Acoustic noise During
operation
(including using
the autocutter)
Approximately 56 dB (ANSI Bystander position)
(Based on Epson evaluation conditions including the use of the
autocutter)
20
10
27
35
55
80
Humidity (%)
Temperatures (C)