152
NO INK CARTRIDGE
An ink cartridge is not loaded. Load an ink cartridge with sufficient ink left.
See "Replacing the Ink Cartridge" on page
61.
INK READ ERROR
The ink cartridge information
could not be read.
Remove the ink cartridge. Load the ink
cartridge again.
If the error occurs again, replace the ink
cartridge with a new one.
See
"Replacing the Ink Cartridge" on page
61.
M/B COVER OPEN
The maintenance box cover is
open.
Close the maintenance box cover.
NO MAINT BOX
The maintenance box is not
loaded.
Load a maintenance box with sufficient
space. See "Replacing Maintenance Box" on
page 64.
M/B READ ERROR
The maintenance box
information could not be read.
Remove the maintenance box. Load the
maintenance box again.
If the error occurs again, replace the main-
tenance box with a new one.
See
"Replacing Maintenance Box" on page
64.
REPLACE INK
It is time to replace the ink car-
tridge.
Load an ink cartridge with sufficient ink.
See "Replacing the Ink Cartridge" on page
61.
REPLACE MAINT B
It is time to replace the mainte-
nance box.
Load a maintenance box with sufficient
space.
See "Replacing Maintenance Box" on page
64.
NOZZLE CLOGGED
A nozzle clog that cannot be
recovered.
Check the printing result, and if the nozzle
clog cannot be permitted, perform repairs.
CUT UNAVAILABLE
Autocutting is being performed
2 or more times with the paper
in the same position.
To prevent pieces of paper, autocutting
cannot be performed twice or more without
feeding the paper. Autocutting is unneces-
sary.
SERVICE SOON ##
The product is near the end of its
service life.
Because the internal parts of the printer are
near the end of their service life, prepare to
replace the printer, or prepare a printer for
replacement.
PRINTER ERROR ##
##: 7B or 7C
Environmental temperature is
out of spec.
Environmental temperature is too low (7B) or
too high (7C). Set operating temperature
from 10 to 35C {50 to 95C}. Turn on the
power again.
LCD display Description Recovery method
To Next Page
Loading...