166
Fanfold Paper
The following media is supported:
•Continuous paper (Blackmark)
•Die-cut label (Blackmark)
Method for arranging the media
•Continuous paper (Blackmark)
Place the edge of the fi rst black mark in a position 25 mm {0.98”} or more from the edge of the
paper, and do not place a black mark before there.
•Die-cut label (Blackmark)
Place the edge of the first label in a position 25 mm {0.98”} or more from the edge of the paper, and
do not place a label or black mark before there, leaving only the backing.
Paper feed
direction
Black mark position
25 mm {0.98” } or more
Paper feed
direction
Black mark position
25 mm {0.98” } or more
To Next Page
Loading...