Altec LASSIE2 Plus - Page 218

218
Die-cut label(Gap) / Roll paper
When "Borderless Printing" is disabled
Top, bottom, left, right margins: 1.5 mm (Typical value)
Paper width
1.5 mm
12.0 mm or more*1
18.0 mm or more*3
1.5 mm
1.5 mm
Auto-cut position
Auto-cut position
Paper feeding direction
Print area
2.0 mm
2.0 mm
1.5 mm
Label area
1.5 mm
1.5 mm
Interval between labels: 3.0 mm {0.12"}
Center of paper width
Backing paper
Print area width
15.0 mm or more*2
0.5 to 1 mm
Perforated line
Outer edge (Removed)
Outer edge (Removed)
*1 When auto cut is not performed: 
5.0 mm or more
*2 When auto cut is not performed: 
8.0 mm or more
*3 When auto cut is not performed:
11.0 mm or more