Altigen MaxCommunicator - CHAPTER 5 Configuring Your MaxCommunicator

MaxCommunicator Manual 49
Configuration
C HAPTER 5
Configuring Your
MaxCommunicator
Using the MaxCommunicator Configuration window, you can configure
the following behaviors and options:
• General Info—password, default trunk access, and other general
settings.
• Call Handling—forwarding, busy call, and no-answer call handling;
call waiting; number of rings before forwarding; automatic answering.
• One Number Access (ONA)—forwarding of specific incoming calls.
• Message Notification—how and when you want to be notified about
incoming voice messages.
• Call Alerts—screen pops and audio beeps.
• Playing voicemail—through handset or soundcard.
• Integration—integrating with a supported CRM.
• Display Customization—tab layout and theme selection.
• IPTalk—IPTalk settings.
• Log—enabling IPTalk log and MaxCommunicator log.
Note: Some options may not be available to you.
Click the button in the upper right of the MaxCommunicator main
window to configure these options.
In the Configuration window, click Apply or OK to save your changes:
• Apply saves your changes and lets you continue in the Configuration
window.
• OK saves your changes and closes the Configuration window.