IS-300A
1. Special Precautions
1-1
These symbols denote
"prohibition". They are
warnings about actions
out of the scope of the
warranty of the product.
These symbols denote
must take.
Each symbol with a
triangle denotes that
the content gives
DANGER, WARNING
or CAUTION to the
operator.
1. Special Precautions
(1) Safety Precautions
Before using, read "Safety Precautions" carefully to understand the correct method
of use.
• These precautions are shown for safe use of our products and for prevention of
damage or injury to operators or others. Be sure to read each of them, since all
of them are important for safety.
• The meaning of the words and symbols is as follows.
Do not touch the inside of the Power Supply except as instructed.
The interior of this Power Supply carries high voltage. It is very dangerous to
touch any parts except as instructed. When inspecting the interior of the
Power Supply, be sure to turn off the power source of the Power Supply and
wait for at least 5 minutes.
Never disassemble, attempt to repair, or modify the Power Supply.
These actions can cause electric shock and fire.
Consult us or your distributor for inspection and repair.
Never burn, destroy, cut, crush or chemically decompose the Power
Supply.
This product incorporates parts containing gallium arsenide (GaAs).
Denotes operations and practices
that may imminently result in serious
injury or loss of life if not correctly
Denotes operations and practices
that may result in serious injury or
loss of life if not correctly followed.
Denotes operations and practices that
may result in personal injury or
damage to the equipment if not
correctly followed.
To Next Page
Loading...
