Amazone Pantera 4502 - Application Rate Increase with Highflow

Construction and function of the field sprayer
Pantera 4502 CP1_E3A_E4
BAG0166.5 12.18
129
6.21 Application rate increase with HighFlow
• Optional application rate increase for applying liquid fertiliser.
The maximum application rate is increased to up
to 400 l/min.
•
In doing so, the agitator pump is used to increase the application
rate. It is then only partially used as an agitator drive, or not at
all.
• The high-performance liquid fertilisation is switched on and off
via the control terminal and the HighFlow switch tap.
(1) Agitator pump as HighFlow pump
(2) Control valve application rate agitator pump
(3) Additional pressure filter and supply for
additional agitator for HighFlow mode and
drainage pressure filter
(4) Switch box for application rate measure-
ment
(5) Sticker HighFlow / no HighFlow
X HighFlow switch tap
Y Return block switch tap
Z Agitator / drain residual quantity switch tap
•
No HighFlow mode (use agitator pump
for stirring)
•
HighFlow mode (use agitator pump for
application rate increase)
•
Additional agitator for HighFlow mode
•
Drain HighFlow pressure filter
The switch tap divides the volume flow
into the agitator and HighFlow. It can
be set as required between Position 0
and the maximum agitating intensity.