Structure and function, carrier vehicle
BAG0166.5 12.18
5.3 Running gear
Fig. 17
(2) Wheel motor with disc brake
(3) Tandem running gear
(4) Oscillating yoke
(5) Track width adjustment
5.3.1 Hydraulic track width adjustment
The machine has an infinitely variable track width adjustment.
The track width of the machine can be adjusted between 1800 mm
and 2250 mm to 2400 mm depending on the wheels mounted.
On Pantera-W, the track width is 2,250 mm to 3,000 mm.
• The track width is adjusted and displayed via the AMADRIVE.
• When driving on public roads, the wheels are not allowed to
protrude over the outer dimensions of the machine.
For France only: if the track width is not adjusted small enough for
road travel, the AMADRIVE will display a warning message and limit
the speed.
The track width is entered via the AMADRIVE and adjusted during an
automatic adjustment drive.
To Next Page