Structure and function, carrier vehicle
BAG0166.5 12.18
5.19.1 Coupling the trailer
2. Instruct people to leave the danger area between the machine
and the trailer before you approach the trailer.
3. Drive the machine backwards to the trailer so that the connect-
ing device couples automatically.
4. Secure the machine against unintentional start-up and rolling.
5. Couple the supply lines to the trailer.
5.1 Fasten the brake line coupling head (yellow) as directed in
the machine coupling with the yellow marking.
5.2 Fasten the supply line coupling head (red) as directed in
the machine coupling with the red marking.
5.3 Plug-in the connector of the trailer lighting to the socket of
the machine.
6. Move the trailer in the transport position.
5.19.2 Uncoupling the trailer
1. Place the trailer on a level parking surface on solid ground.
2. Secure the machine against unintentional start-up and rolling.
3. Move the trailer in the parking position.
4. Disconnect the supply lines.
4.1 Release the supply line coupling head (red).
4.2 Release the brake line coupling head (yellow).
4.3 Pull out the connector of the trailer lighting.
5. Decouple the connecting equipment.
To Next Page