Amazone Pantera 4502 - Pantera-H with Hydraulic Height Adjustment

Structure and function, carrier vehicle
Pantera 4502 CP1_E3A_E4
BAG0166.5 12.18
59
5.5 Pantera-H with hydraulic height adjustment
The hydraulic height adjustment is used for lifting the machine on the
field in order to increase the free passage under the machine.
• The machine height is adjusted and displayed via AMADRIVE.
• Always completely raise / lower the machine.
• Lower the machine again for travelling on the road.
DANGER
Risk of accident from the raised machine tipping over as a result
of the higher centre of gravity.
Always drive with great caution on slopy terrain.
If tipping to the side occurs during the height adjustment due to a
fault, cancel the procedure and lower the machine.
Fig. 19
Machine lowered (default position)
Machine raised
(only for driving on the field)