Amazone Pantera 4502 - 13.6.15 Tyres; Wheels

Cleaning, maintenance and repair
Pantera 4502 CP1_E3A_E4
BAG0166.5 12.18
231
13.6.15 Tyres / wheels
• Required tightening torque for wheel nuts or bolts:
510 Nm
•
Tyre pressure, see Seite 46.
After tightening the wheel nuts, re-
mount the protective caps.
Fig.
176
• Regularly check the
ο Wheel nuts for firm seating.
ο Tyre pressure.
• Only use the tyres and wheels which we have specified (see
page Seite 46).
• Repair work on tyres must only be carried out by specialists us-
ing suitable assembly tools.
• Tyre fitting requires sufficient skills and proper assembly tools.
•
When working on the running
gear , the jack may only be po-
sitioned under the marked lift-
ing points (MD101).
•
The minimum load bearing
capacity must be 5 tons.
•
Take care that the jack is posi-
tioned correctly in the sleeve
(Fig. 176/1).
Fig.
177