Structure and function, carrier vehicle
Pantera 4502 CP1_E3A_E4 BAG0166.5
5.11 Brake system
The hydraulic disc brakes are controlled pneumatically via membrane
cylinders.
This is activated using the foot pedal in the cabin.
A hydraulic parking brake in the wheel gear is activated using the
rocker switch in the cabin.
Both axles are fitted respectively with an automatic load-dependant
braking force regulator (ALB).
Setting data dependent on the axle load:
Input pressure: 8 bar
Input pressure: 3,5 bar
Axle load
sure
sure
Axle load
sure
sure
5.12 Foldable wheel chocks
Each of the wheel chocks is attached with a
thumb bolt in the front storage compartment u
n-
Put the foldable wheel chocks into operating
position by pressing the button and apply directly
o
n the wheels before uncoupling.
26