Amazone Pantera 4502 - Cleaning the Pressure Filter

Using the field sprayer
Pantera 4502 CP1_E3A_E4
BAG0166.5 12.18
191
11.6.4 Cleaning the pressure filter
Cleaning the pressure filter when the tank is empty
1. Undo the sleeve nuts.
2. Remove the pressure filter (Fig. 144/1) and
clean with water.
3. Refill the pressure filter.
4. Check the screw connection for leaks.
Fig.
145
Cleaning the pressure filter when the tank is full
1. Suction chest in position .
2.
Set the function selector to Flushing.
3. Additional agitator in position .
→ Drain the residue into the pressure filter.
4. Undo the sleeve nuts.
5. Remove the pressure filter (Fig. 144/1) and
clean with water.
6. Refill the pressure filter.
7. Check the screw connection for leaks.
8. Additional agitator in position
.