General Safety Instructions
Pantera 4502 CP1_E3A_E4 BAG0166.5
MD 094
Risk of electric shock or burns from acci-
dentally touching overhead power lines or by
coming within the prohibited dis
voltage overhead power lines.
These dangers can cause extremely serious and
potentially fatal injuries.
Maintain a sufficient distance from electrical
overhead cables when swinging any parts of the
machine in and out.
Nominal voltage Safety distance from
transmission lines
over 1 up to 110 kV
over 110 up to 220 kV
over 220 up to 380 kV
2 m
3 m
4 m
MD 099
Risk of contact with hazardous materials due
to improper handling.
Causes serious, potentially fatal injuries any-
where on the body.
Before coming into contact with hazardous mate-
rials, put on protective clothing. Follow the man
facturer's safety instructions for the materials to
be processed
MD101
This symbol indicates jacking points for lifting
gear (jack).
MD 108
Risk of explosion, or danger from hydraulic
fluid escaping under high pressure, caused
by the pressure accumulator which is under
pressure from gas and oil.
These dangers can cause serious and potentially
fatal injuries if highly pressurised, escaping hy-
draulic fluid penetrates the skin and passes into
the body.
• Read and observe the instructions in the
operating manual before carrying out any
maintenance or repair work.
• If you are injured by hydraulic fluid, contact
a doctor immediately.
To Next Page