Ametek UCS 200N .2 Series User Manual

AMETEK CTS UCS 200N
Manual for Operation V 2.41 33 / 54
7.
Technical data
7.1.
EFT / Burst pulse 3a/3b as per ISO 7637-2
7.1.1.
Pulse specification
Open circuit
U = 25V – 1000V ± 10 %
at 50 ohm
U = 13V – 500V ± 10 %
Rise time (10%-90%)
5ns ± 30%
Pulse duration (10%-10%)
150ns ± 30%
Source impedance
Zq = 50  ± 20%
Polarity
Pulse 3a negative and pulse 3b positive
7.1.2.
Settings
Voltage Setting
25V – 1000V in 5V steps
Burst duration
t4 = 0.1ms - 999.9ms
Burst repetition rate
t5 = 0 ms - 9,999ms / man
t5  9,999ms  Auto Trigger
t5 > 9,999ms  Man Trigger
Spike frequency
f = 0.1kHz - 200kHz
t1 = 5µs - 10ms
Test time
T = 0:01min - 999:59min
T > 999:59min = 
Trigger
Automatic repetition of bursts
Manual trigger of one single burst
External trigger of one single burst
7.1.3.
Output
Direct
via HV coaxial connector 50 
Coupling network
to +
DUT supply DC
80V / 50A / 100A / 200A
CRO Trigger
+5V rectangular trigger signal

Ametek UCS 200N .2 Series Specifications

General

Brand	Ametek
Model	UCS 200N .2 Series
Category	Test Equipment
Language	English