AMETEK CTS UCS 200N
Manual for Operation V 2.41 43 / 54
Additional Accessories and options (separately available)
• Remote software " iso.control "
- Test, analysis and documentation
- Licensed version for testing according most automotive standards
- Report generator with export function to word-processing software
• ACC
Automotive Capacitive Coupling Clamp for coupling pulses 3a / 3b to I/O lines.
Umax for pulses 3a/3b : +/-1kV
• CA EFT kit
consisting of
1x KW 50 matching resistor (1:100) type KW 50
1x 1000 matching resistor (1:1000) type KW 1000
1x Adapter AD-CA EFT for verification at + supply line
1x Plastic case
Remark:
User of a 150A or 200A model will also need MSA 250-32 adapter
to verify the pulse at the + supply line.
• CIP9136A (ISO 7637-3 ICC method)
Inductive coupling clamp for ICC methode according to ISO7637-3
• PCJ 9201B
Cal Jig for the CIP9136A
• MN-CIP9136
includes:
- Fischer to N Adapter to Bulk Current injection clamp
- 50Ω HV coax cable 1 m
- AD-N-SC N connector with short circuit
• CA ISO
Calibration adapter with resistors for pulse verification as per standard ISO
7637-2 (micro pulses) and ISO 16750-2 (load dump).
Remark:
Users of UCS 200N150.2/.3 or UCS 200N200.2/.3 models also need an AD-
CA ISO and MSA 250-32 (see below) to adapt the CA ISO to the system
To Next Page
Loading...
Need help?
General
