• 100A Plugs and connectors from Multi Contact
Note: If the manufacturer says that they’re not available, please explain that it’s
part of an existing installation.
Safety sockets KBT6AR-N/...-S with snap-in lock and crimp connection
Model KBT6AR-N/...-S safety sockets are sockets with locking devices and for
crimping onto highly flexible Cu conductor with cross-sections of 10mm2, 16mm2
or 25mm2.
This safety socket is suitable for mating with either safety flush-mounting plugs or
plugs model KST6AR-N. Used together with a flush-mounting plug it acts as an
appliance connector and with plugs as a coupler.
Safety branch “Y” adapter AZB6AR-N-S/6-4
Safety branch adapter with snap-in lock and ergonomic PA/TPE insulation that
grips well. Mating plugs with suitable locking devices can be snap-locked into the
socket. With one pick-off socket Ø 6mm and two safety sockets Ø 4mm for
voltage tests up to 600V, CATIII.
To Next Page
Loading...
Need help?
General
