Ametek UCS 200N .2 Series - Delivery and Accessories; Included Basic Accessories

AMETEK CTS UCS 200N
Manual for Operation V 2.41 42 / 54
9.
Delivery
9.1.
Basic accessory
Some of the included basic accessories that are provided with the UCS 200Nx unit depend on the current
capability of the unit.
All table top UCS 200Nx.2/.3 units come with 1 of the following power mains cables:
CH connector
Schuko connector
US connector
CHN connector
GB connector
Remark:
The country specific power mains cable is only provided, if the UCS 200Nx unit is delivered as a table top
equipment.
If the generator is built into a rack, the rack itself is delivered with the number of required power mains cables and
suitable connector depending on region and country.
UCS 200N50.2/.3
UCS 200N100.2/.3
UCS 200N150.2/.3
UCS 200N200.2/.3
Additional accessories 50A
model:
-1 pair lab cable 4mm (rd/bl)
-2 pair 100A connectors (rd/bl)
-1 instruction
Additional accessories 100A
model:
-1 pair lab cable 4mm (rd/bl)
-2 pair 100A connectors (rd/bl)
-1 instruction
Additional accessories 150A
model:
-2 pair high current connectors
(rd/bl) for the front / rear
Additional accessories 200A
model:
-2 pair high current connectors
(rd/bl) for the front