Ametek UCS 200N .2 Series User Manual

AMETEK CTS UCS 200N
Manual for Operation V 2.41 45 / 54
10.
Appendix
10.1.
Declaration of CE-Conformity
10.1.1.
UCS 200N50
Manufacturer :
AMETEK CTS GmbH
Address:
Sternenhofstr. 15
CH 4153 Reinach
Switzerland
declares, that under is sole responsibility, the product’s listed below, including all their options, are conformity with the
applicable CE directives listed below using the relevant section of the following EC standards and other normative
documents.
Product‘s name:
Ultra compact generator
Model Number(s)
UCS 200N50.2
UCS 200N50.3
Low Voltage Directive 2014/35/EU
Standard to which conformity is declared:
EN 61010-1:2011
Safety requirements for electrical equipment for measurement, control, and
laboratory use.
EMC Directive 2014/30/EU
Standard(s) to which conformity is declared:
EN 61326-1:2013
Electrical equipment for measurement, control and laboratory use
(Requirements for devices to use in industrial area.)
EN 61000-3-2:2014
Limits for harmonic current emissions
EN 61000-3-3:2013
Limitation of voltage changes, voltage fluctuations and flicker in public low-
voltage supply systems.
The purpose of this instrument is the generation of defined interferences signals for EMI immunity testing.
Depending on the arrangement of the test rig, the configuration, the cabling and the properties of the EUT itself, a
significant amount of electromagnetic radiation may result that could also affect other equipment and systems.
The user himself or herself is ultimately responsible for the correct and controlled operation of the rig. In case of
doubt, the tests should be carried out in a Faraday cage.
Manufacturer
AMETEK CTS GmbH
Sternenhofstr. 15
CH 4153 Reinach
Phone: +41 61 204 41 11
Fax: +41 61 204 41 00
By
A. Burger
Design and Research
Place
Reinach BL, Switzerland
Date
12. January 2022

Ametek UCS 200N .2 Series Specifications

General

Brand	Ametek
Model	UCS 200N .2 Series
Category	Test Equipment
Language	English