Ammann ASC 70 - Page 146

142 ASC70
1251998
282114
MAX
MIN
STOP
396262
3.6. Lubrication and Maintenance
Filling the hydraulic circuit:
• Fill using the hydraulic unit.
• You can order the hydraulic unit from the machine manu-
facturer.
Hydraulic unit 230V
Order number: 1251998
Hydraulic unit 110V
Order number: 1255297
Note:
• The hydraulic unit 230Vis intended for operation in 230-
Volt networks (Europe), the hydraulic unit 110Vis intended
for operation in 110-Volt networks (North America).
• Put the quick-release coupling of the hydraulic unit on the
quick-release coupling. Fill the hydraulic circuit until clean
oil starts to ow out of the hose. Collect it to aclean vessel.
• After owing out of approximately 15 l (4 US gal), close the
drain cock.
• Rell oil in the tank to maximum and disconnect the lling
device.