Need help?Do you have a question about the ANAFI Ai and is the answer not in the manual?
General| Camera | 48 MP |
|---|---|
| Video Resolution | 4K HDR |
| Flight Time | 32 minutes |
| Weight | 898 g |
| Obstacle Avoidance | Yes |
| Type | Drone |
| Manufacturer | Parrot |
| Image Sensor | 1/2" CMOS |
| Positioning | GPS, GLONASS, Galileo |
| Max Speed | 16 m/s |
| Operating Temperature | -10°C to 40°C |
| Battery Capacity | 6800 mAh |
| GPS | Yes |
| IP Rating | IPX3 |
| AI Features | Autonomous flight |
| Connectivity | 4G, Wi-Fi |
| Charging Time | 90 minutes |
How to adjust exposure settings for photos and videos in Auto mode.
Mode to keep an object centered while piloting the drone around it.
Enables flying to a specific point on the map by tapping.
Allows flying around a Point of Interest (POI) while keeping it centered.
Tool for preparing and configuring automated flights and shooting sessions.
Useful for creating 2D maps by programming simple grid mapping flights.
Used for creating 3D maps or models of square areas with double grid flights.
For modeling isolated buildings or structures in 3D using circular mapping flights.
Designed to create a 3D model of a single building with a single tap.
Step-by-step guide to pair the drone with its controller.
To Next Page