ANAFI Ai
28
CALIBRATIONS
This section presents the calibration procedures required by the ecosystem: one
procedure for the Skycontroller 4’s magnetometer and four procedures for ANAFI Ai’s
systems:
- Gimbal calibration
- Horizon calibration
- Magnetometer calibration
- Obstacle avoidance calibration
Skycontroller 4
FreeFlight 7 may require you to calibrate the magnetometer of your Skycontroller 4 if it
has been exposed to a strong magnetic field or if your flying conditions change radically –
from a continent to another, for example.
When a calibration must be carried out, the Skycontroller 4 page of FreeFlight 7 displays
a “Calibration required” alert, as on the following screenshot.
Skycontroller
4
calibration required
Tap the alert to access the following screen and follow onscreen instructions.
Ready to calibrate
To Next Page
Loading...