v.early.1.03 – published on December 20, 2021
19
Pairing ANAFI Ai to a Parrot Skycontroller 4
This procedure is useful to pair a drone and a controller which have never been paired,
and to restore the lost pairing between a drone and a controller.
1. Check a compatible microSD card is inserted into ANAFI Ai.
2. Power ANAFI Ai on.
3. Power the Parrot Skycontroller 4 on.
4. Plug the drone to the side USB-C port of the controller with an USB-C to USB-C
cable.
5. The LED of the Parrot Skycontroller 4 flashes briefly in green: it is acknowledging
ANAFI Ai.
6. Wait for synchronization between Parrot Skycontroller 4 and ANAFI Ai (steady
dark blue LED on the controller): check that the left trigger of the Parrot
Skycontroller 4 activates the drone’s gimbal to ensure the synch is complete.
7. Unplug the controller from the drone.
HDMI video sharing
Use a micro HDMI to HDMI cable to connect the Skycontroller 4 to an external screen (or
VR goggles): the screen displays ANAFI Ai’s video stream.
Note that external screens display only the drone’s video stream (and none of the additional
information provided by FreeFlight 7).
In consequence, using an external screen notably enables users to keep an eye on the
drone’s view, even when they navigate FreeFlight 7 menus (settings or dashboard).
Reminder: Parrot recommends using a certified micro-HDMI to HDMI cable (not included
in the box) to connect external pieces of equipment to the Skycontroller 4, as uncertified
cables could impair the ecosystem’s Wi-Fi performances.
The packaging of certified HDMI cables displays the following logo:
To Next Page
Loading...