ANAFI Ai
46
Use the enclosed USB-C to USB-C cable to connect the drone to the USB-C port of
your computer.
If your computer has no USB-C port, you can use a USB-A to USB-C cable to
connect ANAFI Ai to your computer.
Power ANAFI Ai on.
ANAFI Ai mounts as any other external drive: copy your media from the
DCIM/100MEDIA directory to your computer’s hard drive.
When you are done managing your media, eject ANAFI Ai as any other external
drive.
When plugged in to a computer and powered on, ANAFI Ai’s battery
discharges itself. This means you must recharge your smart battery after you
have retrieved your media, even if it was fully charged when you began the
procedure.
FreeFlight 7 Gallery
Finally, you can manage your media and download them directly from ANAFI Ai to
your device with the Gallery of FreeFlight 7.
The Gallery also lets you:
- preview videos and photos, without downloading them to your device;
- format microSD cards (refer to the next section of this guide);
- create panoramas (refer to the “Creating panoramas” section of this guide
for additional details);
- share media.
To access the Gallery from the dashboard of FreeFlight 7, tap the “Gallery” box.
If ANAFI Ai is powered on and connected to the device (directly or through the
Parrot Skycontroller 4), the FreeFlight 7 Gallery displays the microSD card
media, by default.
Tap any media to preview it.
Tap any green media download box to transfer the corresponding media to
your device.
Access the media you have downloaded to your device by tapping the “Local” box, at the
top of the interface.
To Next Page
Loading...