ANAFI Ai
40
Pilot RTH
When the “Pilot” advanced RTH option is selected, ANAFI Ai comes back to the GPS
position of the device used to control the drone (whether linked to a
Parrot Skycontroller 4 or not) at the exact moment an RTH procedure is activated – or to
the last known coordinates of the device, in case it has lost GPS synch.
For this reason, we recommend ANAFI Ai pilots not to move, after they have
activated an RTH procedure, when in “Pilot” advanced RTH mode.
Note that when the Smart RTH function is activated in “Pilot” advanced RTH
mode, ANAFI Ai comes back to the GPS position of the device, at the moment
of the activation of the Smart RTH function – or to the last known coordinates of
the device, in case it has lost GPS synch.
To Next Page
Loading...