v.early.1.03 – published on December 20, 2021
77
Cameraman: target selected
Fly ANAFI Ai around your target. The drone keeps your target at the center of the
frame. Therefore, if you push the right joystick of the Parrot Skycontroller 4 to the
left, ANAFI Ai circles around your target clockwise. If you push the right joystick of
the Parrot Skycontroller 4 to the right, ANAFI Ai circles around your target
counterclockwise.
When the Cameraman mode is activated, ANAFI Ai manages the gimbal tilt to keep
the target in the frame. Therefore, the left trigger of the Parrot Skycontroller 4 is
deactivated in this mode. However, you can still control the zoom, with the right
trigger.
When you release the commands in the Cameraman mode, ANAFI Ai hovers and rotates
to keep following the target.
To end the following of your target, tap the white square on red background (“STOP
button”) in the bottom right corner of the HUD.
When no target is selected, or when the following of the target has been ended by the pilot,
ANAFI Ai’s behavior is similar to that of the Manual flight mode.
Activate and monitor the Cameraman mode with care: always check your flight
plan and the trajectory of your subject are clear from obstacles and safe,
always retain visual contact with ANAFI Ai, and always be ready to stop the
following (tap the “STOP button” of your HUD) in case a danger or any sort of
unexpected obstacle arises.
To Next Page
Loading...