Analyticon Urilyzer 100 Pro - Page 59

58
59
Instrument Settings
11.14.1 Concept: Operator levels
Each consecutive level inherits the rights of the previous level.
User groups Rights
User
This is the standard user group. Members of this group can
perform routine actions such as
•worklistmanagement,
•performtest,
•runcontrol,
•reportresults(printing,exporting),
•modifyuseroptions.
Admin
Members of the secondary user group can perform all actions
of the primary user group. Additionally they can
•congurethesystem(modifysettings),
•manageusers,
•installsoftwareupdates.
Supervisor
Members of the third user group can perform all actions of the
second user group. Additionally they can
•modifythesystemsecuritysettings.
Certain tasks and user controls can be reached and are visible only based on
user rights.
11.14.2 Modifying security settings
The main security settings of the analyzer can be modified on the
»Operators»Security screen. This screen is only accessible for the Supervisor
group.
The Urilyzer 100 offers 5 different pre-configured security levels, although it offers
an expert mode to fulfill special security requirements and system usage.
1. Open system
Automatic login without identification and password, free modification of settings.
No security applied: Anyone can perform tests and modify the settings using the
‘autologin’ operator.
2. Anonymous usage
Automatic login without identification and password for measurement; system
settingsareprotected.Userscanaddthemselvesas‘user’leveloperators.
3. Self-add
Userscanaddthemselvesas‘user’leveloperatorsatlogin.