Andover Controls LCX 890 Series User Manual

LCX 890 Installation Guide 15
2. Pull wires for outputs in the knockouts on the right side of the LCX
890 controller. Pull wires for outputs in the knockouts on the top,
left, and right sides of the LCX 898.
3. Pull the AC cable through the lower knockout on the right side of the
cabinet.
4. Insert two screws in the wall in positions for the two eyelets of the
LCX 890.
5. Hang the unit on the screws and screw the unit directly to the wall.
6. Secure it with two more screws in screw holes provided on the lower
back wall of the unit.

Andover Controls LCX 890 Series Specifications

General

Brand	Andover Controls
Model	LCX 890 Series
Category	Controller
Language	English