Andover Controls LCX 890 Series - Table of Contents

Andover Controls Corporation v
Contents
Setting Up an LCX 890 Series Controller
and Infinet
Site/System Setup Requirements .............................................................2
Controller Dimensions and Weight ...............................................3
Power Requirements ......................................................................3
Cable Limitations ...........................................................................3
Lightning Protection ......................................................................4
Building Ground Requirements .....................................................4
Inspecting the Ground ....................................................................5
Environmental Requirements ........................................................6
Output Requirements .....................................................................6
Input Requirements ........................................................................7
Laying Out the Site Setup ............................................................12
Installing LCX 890 Series Controllers ...................................................13
Unpacking ....................................................................................13
Parts Required ..............................................................................13
Mounting ......................................................................................13
Finding the Connection Ports on the LCX 890 ...........................17
Finding the Connection Ports on the LCX 898 ...........................19
Connecting the AC Power ...........................................................21
Selecting the AC Input Voltage ...................................................22
Wiring the Infinet to the LCX 890/898 .......................................23
Wiring the Infinet to the 9000 Controller ....................................24
Locating the Inputs on an LCX 890 ............................................25
Locating the Inputs on an LCX 898 ............................................27
Wiring the Inputs .........................................................................30
Attaching the Output Relays ........................................................34