Coverage Mapping (Option 431) 6-6 Coverage Mapping Menu
Spectrum Analyzer MG PN: 10580-00349 Rev. H 6-15
6-6 Coverage Mapping Menu
Key Sequence: Shift > Measure (4) key > Coverage Mapping
On Off: Toggles Coverage Mapping On or Off. The current map or the
default grid is displayed when Coverage Mapping is On. When Off, the
instrument shows the standard measurement display.
Save/Recall Points/Map: Press this submenu key to open the “Mapping
Save/Recall Menu” on page 6-16, where you can save the mapping
information or recall a map.
Pan & Zoom: Opens the “Pan & Zoom Menu” on page 6-17. This function is
currently available on the LMR Master S412E only.
Measurement Setup: Press this submenu key to open the “Measurement
Setup Menu” on page 6-19 and set up the instrument for RSSI or ACPR
measurements.
Point Distance/Time Setup: Press this submenu key to open the “Point
Distance/Time Setup Menu” on page 6-20 and set up the Time or Distance
interval for capturing data.
Back: Returns to the “Measure Menu” on page 2-68.
Start/Stop Data Collection: Press this main menu key to start collection of
coverage mapping data based on the settings of Measurement Setup and
Point Distance/Time Setup. A running count of collected data points is
displayed at the bottom of the map. Press this key again to stop data
collection.
Figure 6-9. Coverage Mapping Menu
Start Data Collection
On
Off
Coverage Mapping
Save/Recall
Points/Map
Pan & Zoom
Measurement
Setup
Point
Distance/Time
Setup
Back
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
