Anritsu Spectrum Master MS2720T User Manual

2-13 Measurements Menu CDMA Signal Analyzer
2-28 PN: 10580-00235 Rev. D 3GPP2 MG
Limit Test Menu
Key Sequence: Measurements > OTA > Limit Test
Start/Restart Measurement: Starts or restarts the measurement.
Press the submenu keys to set the desired limit:
Rho Limit
Adj Rho
Multipath Limit
Pilot Dom Limit
Pilot Pwr Limit
Set Avg Measured Values as Limits: Takes the calculated average values
for Rho, Adjusted Rho, Multipath, Pilot Dominance, and Pilot Power in the
Avg row and places them in the Limits row.
Back: Returns to the “Over-The-Air Menu” on page 2-27.
Figure 2-24. CDMA Limit Test Menu
Limit Test
Rho Limit
0.800
Adj Rho Limit
0.850
Multipath Limit
0.3 dB
Pilot Dom Limit
13.0 dB
Pilot Pwr Limit
-80.0 dBm
Set Avg
Measured Values
as New Limits
Start/Restart
Measurement
Back
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com

Anritsu Spectrum Master MS2720T Specifications

General

Brand	Anritsu
Model	Spectrum Master MS2720T
Category	Measuring Instruments
Language	English