EasyManuals Logo

Anritsu Spectrum Master MS2720T User Manual

Anritsu Spectrum Master MS2720T
Go to English
1035 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #843 background imageLoading...
Page #843 background image
2-15 Sweep Menu CDMA Signal Analyzer
2-30 PN: 10580-00235 Rev. D 3GPP2 MG
2-15 Sweep Menu
Key Sequence: Shift > Sweep (3) key
2-16 Measure Menu
This menu is not available in CDMA measurement mode.
2-17 Trace Menu
This menu is not available in CDMA measurement mode.
2-18 Limit Menu
This menu is not available in CDMA measurement mode.
2-19 Other Menus
Preset, File, Mode and System are described in the instrument User Guide.
Sweep Single/Continuous: This submenu key toggles between
continuous sweep and single sweep. In single sweep mode, the results of a
sweep are displayed on the screen while the instrument awaits a trigger
event to start a new sweep.
Trigger Sweep: Pressing this submenu key causes the instrument to make
a single sweep when the instrument is in single sweep mode. This key has
no function when the instrument is in continuous sweep mode.
Figure 2-27. WCDMA/HSDPA Sweep Menu
Sweep
Trigger
Sweep
Sweep
Continuous Single
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com

Table of Contents

Other manuals for Anritsu Spectrum Master MS2720T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Anritsu Spectrum Master MS2720T and is the answer not in the manual?

Anritsu Spectrum Master MS2720T Specifications

General IconGeneral
BrandAnritsu
ModelSpectrum Master MS2720T
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals