EasyManua.ls Logo

AnsaldoSTS 95 User Manual

Default Icon
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1000 Technology Drive, Pittsburgh, PA 15219
645 Russell Street, Batesburg, SC 29006
SM 6495
Copyright © 2008 December 2008
Union Switch & Signal Inc. Rev. 7
MODEL 95
Highway Crossing Gate Mechanism
12-Volt Systems
24-Volt Systems
Highway Crossings
Pedestrian Crossings
Sidewalk Crossings
Installation
Maintenance

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the AnsaldoSTS 95 and is the answer not in the manual?

AnsaldoSTS 95 Specifications

General IconGeneral
BrandAnsaldoSTS
Model95
CategoryGate Opener
LanguageEnglish

Summary

Model 95 Gate Mechanism Introduction

1.1. Description and General Operation

Overview of the Model 95 Gate Mechanism's design, functionality, and versions.

1.3. Parts List Ordering References

Guide to ordering parts by Assembly Part Order Number and breakdown of item part numbers.

Model 95 Gate Mechanism Installation

2.1. Installation Overview and Tools

General installation guide, required tools, and foundation preparation.

2.2. Mast Mounting Procedures

Step-by-step guide for mounting the gate mechanism onto the mast.

2.3. Power and Control Wiring

Wiring requirements, diagrams, and power supply testing for operation.

2.5. Torque Testing and Adjustments

Procedures for testing and adjusting gate arm torque for proper operation.

General Maintenance and Troubleshooting

3.1. Safety Considerations at Multiple Locations

Critical safety precautions when servicing mechanisms at multiple gate sites.

3.2. General Maintenance Procedures

Guidelines for periodic inspection, lubrication, and component upkeep.

3.2.5. Hold Clear Device and Gearmotor Maintenance

Procedures for servicing the hold clear device and gearmotor.

3.3. Troubleshooting Common Issues

Identifying issues, testing modules, and performing power down procedures.

Parts Lists and Diagrams

5.1. Mechanical Assembly Parts Lists

Comprehensive lists of mechanical parts for gate mechanism variants.

5.4. Electrical Assembly Parts Lists

Parts lists for electrical assemblies with different relay configurations.

5.9. Maintenance Switch and Tool Kit

Parts and installation for the optional maintenance switch and essential tool kit.

Gate Arm Clearing Graphs

Figure 6-1 - Ten-Second Clearing Graph

Graph for determining motor circuit ohms based on gate arm length and 10-second clearing time.

Figure 6-2 - Fifteen-Second Clearing Graph

Graph for determining motor circuit ohms based on gate arm length and 15-second clearing time.

Technical Support

RAIL Team Contact Information

Contact details for product and application support from the RAIL Team.