Introduction
SM 6495, Rev. 7, December 2008 1-3
1.2. Reference Documents
The following manuals are part of the family of gate mechanism manuals.
SM 6495 - Model 95 Highway Gate Crossing Mechanism
SM 6495A - Model 95 Gate Mechanism Pedestrian Arm Upgrade Option
SM 6495B - Model 95 Highway Crossing Exit Gate Mechanism for Quad Gate Application
SM 6495C - Model 95 Maintenance Switch Retrofit Kit Installation\Operation
SM 6495D - Model 95 Power-Down Module Installation Kit
SM 6495E - Model 95 Gate Arm Light Fuse Retrofit Kit – Installation Instructions
1.3. Parts List Ordering References
This section presents the Assembly Part Order Number along with a breakdown of the specific item
part numbers that constitute that Order Number.
In addition to the order numbers listed below special tools and kits are available as follows:
Tool Kit – P\N N46707001 – Included with all new Model 95 Gate Mechanisms – See Section 5.10 for
the components in this kit.
Spare Parts Kit, Non-Vital – P\N X46700016 – See Section 5.11 for a list of the components in this kit.
Torque Wrench Kit – P\N X46700003 – See Section
5.12 for a list of the components in this kit.
Power Down Module Upgrade Kit – P\N X46700031 – See Section 0 for a list of the components in
this kit.
Maintenance Switch Retrofit Assembly – P\N N46709202 – See Section
5.9 for a list of the
components in this kit.
Gate Arm Light Fuse Retrofit Kit – P\N X46700039 – See Section 5.16 for a list of the components in
this kit.