Apogee ensemble User Manual

Select Ensemble in Ableton
1. Go to Live > Preferences. Select the Audio tab.
2. In Driver Type, select “CoreAudio”.
3. In Audio Input & Audio Output Device, select “Ensemble Thunderbolt”.
4. Start by setting the buffer size to “64 samples”. This setting may need to be adjusted based on your computer’s
performance.
19

Apogee ensemble Specifications

General

Type	Audio Interface
Simultaneous Channels	36
Phantom Power	Yes
Word Clock	Yes
Bit Depth	24-bit
Digital Inputs	ADAT, S/PDIF
Digital Outputs	ADAT, S/PDIF
Connectivity	FireWire
Inputs	8 analog
Outputs	8 analog