Applied Biosystems StepOne User Manual

DRAFT September 25, 2007 1:07 am, 4376782_Colocated_Installation.fm
Chapter 3 Install the Colocated Layout
Perform the RNase P Experiment
Applied Biosystems StepOne
™
and StepOnePlus
™
Real-Time PCR Systems
Installation, Networking, and Maintenance Guide
46
Notes
Unload the
Instrument
PHYSICAL INJURY HAZARD. During instrument operation, the
temperature of the sample block(s) can exceed 100 ° C. If the instrument has been used
recently, keep your hands away until the sample block(s) reach room temperature.
IMPORTANT! Wear powder-free gloves when you handle the RNase P plate .
1. Open the instrument drawer.
2. Remove the RNase P plate from the sample block(s).
3. Close the instrument drawer carefully.
4. Dispose of the RNase P plate.
IMPORTANT! Do not power off the instrument following a run. The instrument
automatically enters a hibernation mode when not in use. Power off the instrument
only when it will not be used for an extended period.

Applied Biosystems StepOne Specifications

General

Brand	Applied Biosystems
Model	StepOne
Category	Laboratory Equipment
Language	English