Aritech CS875 User Manual

CS175-275-575-875 Installation Guide 45
Scroll
keys
Press to scroll through letters and lists on the keypad display.
Stay
Press to insert a space.
Chime
Press to delete characters.
Exit
Press to access the library.
Steps
1. Press 92.
2. Enter a Go to program code.
3. The keypad prompts you to enter messages for zones 1-168 and 193-196. Press
# after each message.
•
Message 1 – Descriptor zone 1.
•
Message 2 – Descriptor zone 2.
•
…
•
Message 168 – Descriptor zone 168.
•
Message 193 – Custom message top line.
•
Message 194 – Custom message bottom line.
• Message 195 – Shutdown message top line.
•
Message 196 – Shutdown message bottom line.
4. When you are finished entering messages, press #and the Exit key. Any changes
you have made are copied to other LCD keypads on the system. To display
different messages on other LCD keypads, press 93 to enable the custom
message lock.
10.3 Programming the LED keypads
This section describes how to program the address, partition and available options for
each LED keypad.
10.3.1 Changing the keypad number and partition
You must set the partition and keypad number for the current keypad. The keypad can
connect to the bus only after you set these numbers.
Steps
1. Press 94.

Aritech CS875 Specifications

General

Brand	Aritech
Model	CS875
Category	Security System
Language	English