M head: Power
warning
The power level on the ALEXA M camera
head is insufficient. Use a power source
with a power supply of at least 40 W.
M head: High
temperature
The temperature of the camera head is too
high. Apply additional cooling to prevent
automatic shutdown.
M head: Low fan
speed
The fan of the ALEXA M camera head
cannot reach a sufficient cooling speed. Fan
might have to be cleaned or replaced.
ALEXA error messages and meanings
Main Bat: Low power The battery attached to the BAT
connector has reached its low
level (10% below warning level).
Battery must be replaced.
Onboard Bat: Low power The onboard battery has
reached its low level (10% below
warning level). Battery must be
replaced.
All Bats: Low power Batteries on both BAT connector
and onboard battery(s) have to
be replaced.
Card 1/2: End of lifetime The SxS PRO card in slot 1/2
has reached the end of its life
cycle and has become read-only.
Use a new card.
Media end of lifetime The recording medium has
reached the end of its life cycle
and has become read-only. Use
a new medium.
Card 1/2: Write speed error The current write speed could
not be handled by the SxS PRO
card in slot 1/2.
Media: Write speed error The current write speed could
not be handled by therecording
medium.
Cards 1&2: Full Both SxS PRO cards are full.
Use fresh cards.
Cards 1&2: End of lifetime Both SxS PRO cards have
reached the end of their life
cycle and has become read-only.
Use fresh cards.
To Next Page
Loading...
Need help?
General
