132
m
fps
Appendix
Display: Monitoring Defective
Note: The warning “Monitoring Defective” can be over-
ridden by switching off and on the camera’s
main switch.
Loose Film Loops in the Magazine
If the camera shuts off automatically while running, loose
film loops may be formed in the magazine. Before the
camera is started again, the film in the magazine must be
tensioned manually.
Fuses
The ARRIFLEX 435 Advanced is equipped with self-resetting
automatic fuses. It is therefore not necessary to replace
blown fuses.
Motion Control Error Codes
In motion control mode the camera will display an error
code in the bottom line of menu 8 if a control error occured:
no exit code / no error occured / everything ok
Overspeed transport
Accleration step limit transport
Acceleration limit transport
Overspeed shutter
Acceleration step limit shutter
To Next Page
Loading...
Need help?
General