61
m
fps
m
fps
m
fps
Display: Movement Open
The display shows if the movement has not been locked
correctly into operating position.
The operation control indicator glows red
the movement block is not correctly locked,
the camera is not operational.
Display: Warning of Reverse Operation with
an ARRIFLEX 35 III 300 m Magazine
Reverse operation is not possible with an ARRIFLEX 35 III
300 m magazine. If the camera is set to reverse operation
and an ARRIFLEX 35 III 300 m magazine is attached, this
warning will show in the camera display.
Note: See
Appendix
for other messages
Camera Operation
Display: ARRIMAG 300E is taking up film
This message will be displayed while the ARRIMAG 300
E is taking up loose film (slack) in the magazine.
To Next Page
Loading...
Need help?
General