Need help?Do you have a question about the Artos CS-327 and is the answer not in the manual?
General| Storage | 1TB NVMe SSD + 2TB HDD |
|---|---|
| RAM | 32GB DDR4 |
| Operating System | Windows 10 |
| Power Supply | 750W 80+ Gold |
| Ports | USB 3.1, Ethernet, Audio |
Details on safety interlock systems, front guard, and scrap drawer functionality.
Important safety warnings and precautions for operating the CS 327 machine.
Technical specifications of the CS 327, including wire size, cut lengths, and strip lengths.
Procedure for powering up the CS 327 and initializing the software.
Guide to the primary operator interface for running and programming the CS 327.
Configuring part-specific settings, including process and label tabs.
Defining and managing wire characteristics for machine operation.
Procedures for creating and editing job programs for batch or harness modes.
Functions available in the File menu, including save, import, and export.
Accessing maintenance functions like I/O status and data organizer.
Configuring and using material validation via barcode scanning.
Setting up machine configurations, blade types, and feed options.
Configuring preprocess options like slitting, marking, and stamping.
Step-by-step guide for replacing the stripping blades.
Step-by-step guide for replacing cutoff blades.
Diagnosing and resolving issues with wire slug removal and belt slipping.
Troubleshooting inconsistent wire length measurements.
Managing user logins and passwords for the CS 327 software.
Description of guard interlock and emergency stop functions.
Guidance for troubleshooting servo drive system faults and errors.
To Next Page
