Artos CS-327 - Options

58
OPTIONS
General Machine Options:
 Wire Straightener – Either heavy duty or light duty available. Heavy duty may be purchased in
2 versions, vertical axis only, or vertical and horizontal axis. Light duty handles wires from 30
to 12 AWG (0,05 – 4.5 mm sq.)
 5‐142804‐1HDwirestraightenerverticalaxis,bar,androllerinfeed.7rollers50mmdia.27mm
wide.
 5‐142805HDwirestraightenerverticalandhorizontalaxis,bar,androllerinfeed.7rollers
50mmdia.27mmwide.
 5‐142804‐2HDwirestraightener,ovalwireverticalaxis,bar,androllerinfeed.7rollers50mm
dia.27mmwide.
 5‐143151Smallwirestraightenerverticalaxis,bar,infeedguide.9rollers19mmDiax10mm
Wide.
 5‐143152Smallwirestraightenerverticalandhorizontalaxis,bar,infeedguide.9rollers
19mmDiax10mmWide.
 5‐143606BarassemblyforWM‐6hotstampmarker.Nostraightenersorguides.
 5‐147087‐510BarassemblyforBradyWraptor.Includesrollerinfeedandverticaland
horizontalaxisHDwirestraighteners.7rollers50mmdia.27mmwide.
 Dual Blade Cutterhead allows two sets of blade to be
utilized, one set for cutting and one for stripping. The
major advantage is that the strip blades will stay sharp for
a much longer time because they are not cutting the
conductor.
 2-142778-510 Tool holder assembly 2 blades.