Artos CS-327 - OPERATION; RUN SCREEN

12
OPERATION
The following information will allow you to put your CS 327 into production in a minimum amount of time.
Additional features and maintenance functions will be discussed in future sections
RUN SCREEN
The RUN SCREEN is the primary screen the operator will use to run and program the CS 327.
SCREEN LEGEND
THE FOLLOWING ITEM NUMBERS WILL BE REFERRED TO THOUGHOUT THIS
MANUAL
1. Enter – Wire length tip to tip. (See page 16 )
14
15
16
13
17/18
10
11
20
1
4
5 6
9
2
3
7
8 19
24
25
26
27